Epson WF-7820 Series User Manual

57
Note: If you don't see the icon, you may have selected the wrong network name or entered the
password incorrectly. Repeat these steps to try again.
Parent topic: Wi-Fi Infrastructure Mode Setup
Related references
Status Icon Information
Related tasks
Entering Characters on the LCD Screen
Setting Up Wireless Printing from a Smart Device Using Epson Smart Panel
You can use the Epson Smart Panel app to connect your Epson product to a wireless network or
connect your smart device directly to the product. Epson Smart Panel is available on iOS and Android
devices.
Make sure you have the following:
• A Bluetooth-enabled device that is connected to a wireless network
• The Epson Smart Panel app installed on the device
• The wireless network name (SSID) and password
Note: Your device must be close enough to the product to create and maintain a Bluetooth connection.
1. Make sure the product is turned on and is ready to print.
Note: You must perform initial setup and ink installation before setting up wireless printing.
2. Open the Epson Smart Panel app on your device.
3. Do one of the following:
• If the app automatically recognizes the product, follow the on-screen instructions to set up the
wireless connection.
• If the app does not automatically recognize the product, select the + icon and continue with the
next step.
4. On the next screen, select Connect to a New Product.

Epson WF-7820 Series Specifications

General

Print Resolution	4800 x 2400 dpi
Max Print Size	13" x 19"
Duplex Printing	Yes
Scan Resolution	1200 x 2400 dpi
Paper Capacity	250 sheets
ADF Capacity	50 sheets
Display	4.3" color touchscreen
Functions	Print, Copy, Scan, Fax
Scanner Type	Flatbed colour image scanner
Connectivity	Wi-Fi, Ethernet, Wi-Fi Direct, USB
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print
Paper Sizes	A3, A4, A5, A6, B4, B5, C6, DL
Fax Transmission Speed	Approx. 3 seconds per page
Fax Memory	Up to 550 pages
Print Technology	PrecisionCore
Ink Type	DURABrite Ultra Ink