Copying
Copying Basics
is section explains the steps for copying from the Copy menu on the control panel.
1. Load paper in the printer.
2. Place the originals.
3. Tap Copy on the home screen.
4. Make the settings on the Copy tab.
❏ B&W/Color: Select color copy or monochrome copy.
❏
(2-Sided): When making 2-sided copies, tap the item, tap 1→2-Sided, and then make settings for
Original Orientation and Binding Margin. Tap OK to conrm.
❏
(Density): Tap the item to make settings for copy density. Tap + to increase the density, and tap - to
decrease the density. Tap OK to
conrm.
5. Tap the Advanced Settings tab, and then change the settings as necessary.
6. Tap the Copy tab, and then set the number of copies.
7. Tap
x
.
Note:
e color, size, and border of the copied image are slightly dierent from the original.
Related Information
& “Loading Paper in the Paper Cassette 1” on page 48
& “Loading Paper in the Paper Cassette 2” on page 51
& “Loading Paper in the Rear Paper Feed Slot” on page 56
& “Placing Originals on the Scanner Glass” on page 59
& “Menu Options for Copying” on page 117
Various Copying Methods
Copying in Various Layout
You can copy easily by selecting a menu for your purpose such as copying both sides of an ID card onto one side of
A4 size paper, or copying two facing pages of a book onto a single sheet of paper.
1. Load paper in the printer.
User's Guide
Copying
112
To Next Page
Loading...
