& “Guide to the Edit Photo Screen” on page 69
& “Menu Options for Editing Photos” on page 75
Printing ID Photos
You can print ID photos using data on a memory device. Two copies of one photo are printed at two dierent sizes,
50.8×50.8 mm and 45.0×35.0 mm, on 10×15 cm (4×6 in.) size photo paper.
1. Load paper in the printer.
2. Insert a memory device into the SD card slot or the external interface USB port of the printer.
3.
Tap Print Photos on the control panel.
4. Tap Print photo ID.
5. When a message telling you that loading photos is complete is displayed, tap OK.
6.
Select the photo you want to print on the select photo screen.
7. Tap Print Settings to make paper and print settings.
8. Tap Preview and Print, and then conrm the settings.
9. Tap Edit to edit the photos as necessary.
10. Enter the number of copies, and then tap
x
.
Related Information
& “Loading Paper in the Paper Cassette 1” on page 48
& “Loading Paper in the Paper Cassette 2” on page 51
& “Loading Paper in the Rear Paper Feed Slot” on page 56
& “List of Paper Types” on page 46
& “Inserting a Memory Card” on page 62
& “Guide to the Select Photo Screen (Tile View)” on page 66
& “Menu Options for Selecting Photos” on page 73
& “Guide to the Select Photo Screen (Single View)” on page 67
& “Menu Options for Paper and Print Settings” on page 73
& “Guide to the Preview Screen” on page 68
& “Guide to the Edit Photo Screen” on page 69
& “Menu Options for Editing Photos” on page 75
Printing Photos with a Template
You can print the photos on your memory device in various layouts such as 2-up, 4-up, and upper half. You can
select where to place the photos.
User's Guide
Printing
71
To Next Page
Loading...
