Epson XP-8500 Series

Scanning
Scanning Using the Control Panel
Scanning to a Memory Device
You can save the scanned image to a memory device.
Note:
You cannot save multiple originals as one PDF le when scanning from the control panel. By using Epson Scan 2 and setting
Add or edit pages aer scanning on the Document Mode, you can scan additional originals aer you scanned the original,
and then save as one le.
1. Insert a memory device into the printer's external interface USB port.
2.
Place the originals.
3. Select Scan on the home screen.
4. Select Memory Device.
If you attach multiple memory devices to the printer, select the memory device to which the scanned images
are saved.
5.
Set items on Basic Settings tab, such as the save format.
❏ BW/Color: Select whether to scan in color or in monochrome.
❏ JPEG/PDF: Select the format in which to save the scanned image.
❏
(Quality): Select the item, and then set the Original Type and Resolution. Next, select OK to nish
making settings.
6. Select Advanced Settings tab, and then check settings, and change them if necessary.
7. Select Basic Settings tab, and then tap
x .
Note:
❏ Scanned images are saved in the "001" to "999" folders in "EPSCAN" folder.
❏ e color, size, and border of the scanned image will not be exactly the same as the original.
Related Information
& “Inserting a Memory Card” on page 62
& “Placing Originals on the Scanner Glass” on page 59
Basic Menu Options for Scanning to a Memory Device
B&W/Color:
Select whether to scan in color or in monochrome.
User's Guide
Scanning
120