Power and Control Panel Problems
Power Does Not Turn On
❏ Make sure the power cord is securely plugged in.
❏ Hold down the
P
button for a little longer.
Power Does Not Turn O
Hold down the
P
button for a little longer. If you still cannot turn o the printer, unplug the power cord. To
prevent the print head from drying out, turn the printer back on and turn it o by pressing the
P
button.
Power Turns O Automatically
❏ Select Settings > Basic Settings > Power O Settings, and then disable the Power O If Inactive and Power
O If Disconnected settings.
❏ Select Settings > Basic Settings, and then disable the Power O Timer Setting.
Note:
Your product may have the Power O Settings or Power O Timer feature depending on the location of purchase.
LCD Screen Gets Dark
e printer is in sleep mode. Tap anywhere on the LCD screen to return it to its former state.
Cannot Close the Control Panel
If the output tray is not inserted all the way, the control panel cannot be closed. Push the output tray fully into the
printer with your hand until it touches the back of the slot, and then close the control panel.
The Auto Power On Features does not Work
❏ Make sure that the Auto Power On setting in Basic Settings has been enabled.
User's Guide
Solving Problems
189
To Next Page
Loading...
