Epson XP-8500 Series

Selecting Change the Connection Methods
Follow the on-screen instructions until the following screen is displayed.
Select Change or re-set the connection method on the Select Soware Installation screen, and then click Next.
Disabling Wi-Fi from the Control Panel
When Wi-Fi is disabled, the Wi-Fi connection is disconnected.
1. Tap
on the home screen.
2. Tap Wi -Fi ( R e c om m ende d ) .
e network status is displayed.
3. Tap Change Settings.
4. Tap Others > Disable Wi-Fi.
5. Check the message, and then tap Start Setup.
6. When a completion message is displayed, tap Close.
e
screen automatically closes
aer
a
specic
length of time if you do not tap Close.
7. Tap Close
User's Guide
Network Settings
42