1. Turn o the printer by pressing the
P
button.
2. Make sure the power light turns o, and then unplug the power cord.
c
Important:
Unplug the power cord when the power light is o. Otherwise, the print head does not return to the home
position causing the ink to dry, and printing may become impossible.
3. Disconnect all cables such as the power cord and USB cable.
4.
Make sure there is no memory card inserted.
5. Remove all of the paper from the printer.
6. Make sure there are no originals on the printer.
7.
Open the scanner unit with the document cover closed.
8. Secure the ink cartridge holder to the case by attaching the supplied protective material on top with tape.
9. Close the scanner unit.
User's Guide
Appendix
224
To Next Page
Loading...
