MINI-LINKEandEMicro
6.2 M SM – MINI-LIN K Service Manager
The MINI-LINK Ser vice Manager (MSM) is used for installati on and field
support of MINI-LINK E and E Micro, C and MkII equipment. MSM software is
run under Windows 98, 2000 or NT on a PC.
Using MSM enables access to all terminals in a sub-network from any site in
the network. Several PCs can access the same network simultaneously.
MSM facilities include setup, local and remote fault tracing as well as
performance monitoring, with the same user interface as in Netman.
The figure below illustrates MSM connected to a sub-network.
503A
502B
MINI-LINK
Service Manager
Sub-network
3565
Figure 77 Field support using the MINI-LINK Service Manager
110
AE/LZT 110 2012 R8C 2002-03-04
To Next Page
Loading...