MINI-LINKEandEMicro
3.13 Upgrading
3.13.1 Change of transmission capacity
The capacity agile MMU 2x2 – 34+2 allows capacity upgrade without hardware
replacement. This is done by using MINI-LINK Ser vice M anager (MSM).
When using an MMU with fixed traff ic capacity, the upgrade is achieved by
exchanging it for an MMU with a higher traffic capacity.
When 8x2 or 17x2 Mbit/s is required an SMU has to be added. In some cases
the AMM 1U has to be changed to an AMM 2U-3. This applies to both the
capacity agile MMU and M MUs with fixed traffic capacity. See the MINI-LINK E
and E Micro Product Catalog (AE/LZT 110 2011) for more information.
77
AE/LZT 110 2012 R8C 2002- 03-04
To Next Page
Loading...