MINI-LINKEandEMicro
3.3 RAU1 (7-E and 8-E)
This radio unit contains frame, cover, microwave sub-unit and filter unit.
The vertical frame has a waveguide interface for connection to the antenna.
The bottom of the cover carries the radio cable connector that is the interface
with the indoor m odem unit (MMU), and a test port for antenna alignment.
The connector for the radio cable is equipped with gas discharge tubes for
lightning protection.
Replacing the filter unit can change the sub-band for a radio within a group of
sub-bands. For more information, see the MINI-LINK E and E Micro Product
Catalog (AE/LZT 110 2011), chapter Radio Units.
5315
Figure 26 RAU1 for 7 and 8 GHz
25
AE/LZT 110 2012 R8C 2002- 03-04
To Next Page
Loading...