MINI-LINKEandEMicro
5.2 A ntenna Installation
This section describes the mounting kits for the 0.2 m, 0.3 m and 0.6 m
compact antennas.
An antenna mounting kit consists of two rigid, extruded aluminum brackets
connected with two stainless steel screws along the azimuth axis. The brackets
are anodized and have threaded and unthreaded holes to provide adjustment of
the antenna in azimuth and elevation.
The s upport can be clamped to poles with a diameter of 50 – 120 mm or on
L-profiles 40 x 40 x 5 – 80 x 80 x 8 mm with two anodized aluminum clamps.
All screws and nuts for connection and adjustment are in stainless steel.
NordLock washers are used to secure the screws.
3562
Figure 64 Mounting kit for t he 0.2 m compact antenna
The 0.2 m compact antenna mounting kit can be adjusted by ±13
in elevation
and by ±90
in azimuth.
3561
Figure 65 M ounting kit for 0.3 m and 0.6 m compact antennas
90
AE/LZT 110 2012 R8C 2002-03-04
To Next Page
Loading...