MINI-LINKEandEMicro
3508
Figure 11 The radio unit and a 0.6 m compact antenna fitted separately
2.2.3 Indoor Installation
The indoor parts are fitted in 19" racks, in ETSI and BYB cabinets or directly
on the wall/desk. An access module consists of an Access Module Magazine
(AMM) and a set of different plug-in units. The following AMMs for different
applicati ons are available as standard:
• AMM 1U for end terminals
• AMM 2U-3 for single or dual terminal sites, containing up to four plug-in units
• AMM 4U for more complex, multi-terminal sites, containing up to seven
plug-in units
The indoor part can be upgraded or reconfigured with plug-in units, providing
site flexibility.
The interconnection between the outdoor part (radio unit and antenna) and
the indoor part is a single coaxial cable carrying full duplex traffic, DC supply
voltage, ser vice traffic as well as operation and m aintenance data.
11
AE/LZT 110 2012 R8C 2002- 03-04
To Next Page
Loading...