MINI-LINKEandEMicro
8.7 E TU Data
DC Power Supply
For information on power supply, see Section 8.4.1 on page 140.
Power Consumption
≤ 10 W
Interfaces
Ethernet 10BASE-T and 100BASE-TX, 100
, according to IEEE
802.3.
RJ-45 connector configured as an Ethernet station
according to EIA/TIA 568-A.
Use an S-FTP CAT 5 cable for connection.
G.703 2 Mbit/s (E1), balanced 120
or unbalanced 75 ,
25-pin D-sub connector
8 Mbit/s (E2), unbalanced 75
, SMZ connector
34 Mbit/s (E3), unbalanced 75
, SMZ connector
O&M RS 232C (V.24/V.28), 8 bits, no par ity, 1 stop bit, no flow
control, 19 200 bit/s, 9-pin D-sub connector
ALARM Optocoupler, normally open, maximum 200 V/100 mA,
9-pin D-sub connector
Operational Temperature
–5
Cto+45C
8.8 M XU Data
For information on power supply, see Section 8.4.1 on page 140.
Interfaces
• 4x2 M bit/s according to ITU-T Rec G.703:
− Unbalanced 75
− Balanced 120
• One V.24 data interface: up to 19.2 kbit/s asynchronous or 8/64 kbit/s
synchronous
• Exter nal alarm inputs, see table below
152
AE/LZT 110 2012 R8C 2002-03-04
To Next Page
Loading...