MINI-LINKEandEMicro
The terminal can be DC or AC powered. On sites with only one terminal, traffic
and DC can be directly connected with two cables. On sites with more than one
terminal or where no DC supply is available, a Radio Connection Box (RCB) is
required. For more information, see Section 7.1 on page 113.
The gray painted radio unit fits onto the back of the antenna, but can equally
well be installed separately from the antenna and connected with a waveguide
feeder.
Applications for M INI-LINK E Micro are in mobile telephony, business access,
PBX (Private Branch eXchange), and data networks together with any outdoor
installed telecom equipment.
It can be used as an end-term inal or when using the RCB as a repeater or
multi-terminal site.
3517
Figure 22 MINI-LINK E Micro with RCB, multi-terminal site
19AE/LZT 110 2012 R8C 2002- 03-04
To Next Page
Loading...