EasyManua.ls Logo

Ericsson SmartEdge 600 - Status LEDs on 12-Port 10;100 Ethernet Card

Ericsson SmartEdge 600
174 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SmartEdge 600 Router Hardware Guide
6.9.1 Status LEDs
Figure 43 Status LEDs on 12-Port 10/100 Ethernet Card
Table 109 Equipment LEDs on 12-Port 10/100TX Ethernet Card
Label Activity Color Description
On Red A failure exists on the card.
(1)
FAIL
Off None No failure exists on the card.
On Green This card is in service.ACTIVE
Off None This card has failed (the FAIL LED is on).
(1) A failure can be total, partial, or forced. Failure on any part of the card, including failure of any of its ports, results in
the FAIL LED being on.
Table 110 Facility LEDs on 12-Port 10/100TX Ethernet Card
Label Activity Color Description
On Green The link is up.
Blinking Green The link is up and active.
LNK
Off None The link is down.
On Yellow The link is operating at 100 Mbps.SPD
Off None The link is operating at 10 Mbps.
6.10 60-Port Fast Ethernet Card
The 60-port Fast Ethernet (FE) card, which provides 60 FE ports and two
Gigabit Ethernet (GE) ports, is also referred to as the FE–GE card. The FE
ports are copper-based 10Base-T or 100Base-TX with selectable speeds of
132
27/153 30-CRA 119 1170/1 Uen A | 2010-04-09

Table of Contents

Related product manuals