Card Descriptions
6.14.1 Status LEDs
Figure 48 Status LEDs on 10-Port Gigabit Ethernet 1020 Card
Table 126 Equipment LEDs on 10-Port Gigabit Ethernet 1020 Card
Label Activity Color Description
On Red A failure exists on the card.
(1)
FAIL
Off None No failure exists on the card.
On Green This card is in service.ACTIVE
Off None This card has failed (the FAIL LED is on).
(1) A failure can be total, partial, or forced. Failure on any part of the card, including failure of any of its ports, results in
the FAIL LED being on.
Table 127 Facility LEDs on 10-Port Gigabit Ethernet 1020 Card
Label Activity Color Description
On Yellow The link is transmitting or receiving frames.ACT
Off None The link has no active frame.
On Green The link is up.LNK
Off None The link is down.
6.15 20-Port Gigabit Ethernet 1020 Card
The 20-port Gigabit Ethernet 1020 (GE1020) card is designed for traffic
management by using the second generation of the PPAs, each of which
supports 1 GB of memory and can process data internally to match the speed
143
27/153 30-CRA 119 1170/1 Uen A | 2010-04-09
To Next Page
Loading...
