Contents
Contents
1 Site Preparation 1
1.1 Agency Compliance Information 1
1.2 Electrical Specifications 1
1.3 Electrical Power Connections 4
1.4 Environmental Requirements 4
1.5 Physical Specifications 5
1.6 Select the Rack 7
1.7 Select the Installation Method 8
1.8 Equipment and Personal Safety Warnings 9
1.9 DC Power Source Warnings 10
1.10 Access During Initial Startup and Reload Operations 11
1.11 Access During Normal Operations 11
1.12 Management Access Options 11
1.13 Gathering Cables and Tools 12
1.14 Management Access Cables 13
1.15 External Timing Cables 15
1.16 Line Card Cable Specifications 16
1.17 Transceiver-Based SONET/SDH Line Card Cables 17
1.18 10/100 Ethernet and Fast Ethernet–Gigabit Ethernet
Cables 18
2 Installing the Hardware 21
2.1 Install the Chassis Mounting Brackets 22
2.2 Install the Chassis 23
2.3 Install the Cable Management Brackets 23
2.4 Connect Power and Ground Cables 24
2.5 Optional AC Power Shelf 27
2.6 Card Slots 32
2.7 Install Cards 33
2.8 Connections for Management Access 40
2.9 Connections for External Timing Cables 41
2.10 Connections for Line Card Cables 42
2.11 Connect and Route Cables 43
27/153 30-CRA 119 1170/1 Uen A | 2010-04-09
To Next Page
Loading...
