Installing the Hardware
2.11 Connect and Route Cables
Figure 20 Cable Routing
Cable connections are made with standard cables.
Caution!
Risk of severe damage to your eyes. All versions of the optical cards are Class
1 products, which use lasers to convert electrical signals to optical signals that
can damage your eyes. Keep the connectors covered until you are ready to
connect the fiber-optic cables. When you remove a cover, do not stare into the
connector or directly view the laser beam emerging from the connector.
Caution!
Risk of damage to fiber-optic cables. These cables are fragile and are easily
damaged when bent. Never step on a cable. Never twist it when connecting it
to or disconnecting it from a line card.
4327/153 30-CRA 119 1170/1 Uen A | 2010-04-09
To Next Page
Loading...
