ESAB Cutmaster 80 - Replacement Parts - for Machine Torches with Unshielded Leads

ESAB CUTMASTER 80
PARTS LIST Manual 0-5396
6-4
6.07 Replacement Parts - for Machine Torches with Unshielded Leads
Item No. Qty Description Catalog #
 1 1 TorchHeadAssemblywithoutleads(includesitems2,3,and14)  9-8220
2 1 Large O-Ring 8-3487
3 1 Small O-Ring 8-3486
4 1 PIP Switch Kit 9-7036
5 Unshielded Automated Leads Assemblies with ATC connectors
1 5 - foot / 1.5 m Leads Assembly with ATC connector 4-7850
1 10 - foot / 3.05 m Leads Assembly with ATC connector 4-7851
1 25 - foot / 7.6 m Leads Assembly with ATC connector 4-7852
1 50 - foot / 15.2 m Leads Assembly with ATC connector 4-7853
6 Unshielded Mechanized Leads Assemblies with ATC connectors
1 5 - foot / 1.5 m Leads Assembly with ATC connector 4-7842
1 10 - foot / 3.05 m Leads Assembly with ATC connector 4-7843
1 25 - foot / 7.6 m Leads Assembly with ATC connector 4-7844
1 50 - foot / 15.2 m Leads Assembly with ATC connector 4-7845
7 1 11” / 279 mm Rack 9-7041
8 1 11” / 279 mm Mounting Tube 9-7043
9 1 End Cap Assembly 9-7044
 10 2 Body,Mounting,PinchBlock  9-4513
 11 1 Pin,Mounting,PinchBlock  9-4521
 12 1 TorchHolderSleeve  7-2896
13 1 PIP Plunger and Return Spring Kit 9-7045
  1 PinionAssembly(Notshown)  7-2827
  1 5”/126mmPositioningTube(Notshown)  9-7042
NOTE!
*Does not include Control Cable Adapter or Through - Hole Protector.
Refer to Section 6.09 for Replacement Shielded Leads Assemblies.