ESAB Cutmaster 80 - Default Chapter; Declaration of Conformity

Manufacturer’s Authorized Representative
Steve Ward V.P. Europe and General Manager
Address: ESAB
Europa Building
Chorley N Industrial Park
Chorley, Lancashire,
England PR6 7BX
Date: May 30, 2015
Steve Ward
Full Name
V.P. Europe and General Manager
(Position)
(Signature)
Declaration of Conformity
We ESAB
of 6052 Swingley Ridge Road
Suite 300
Chesterfield, MO 63017 U.S.A.
in accordance with the following Directive(s):
 •2006/95/EC The Low Voltage Directive
 •2004/108/EC The Electromagnetic Compatibility (EMC) Directive
hereby declare that:
Equipment: Plasma Cutting Power Source
Model Name/Number: ESAB Cutmaster® 80
Market Release Date: May 30, 2015
is in conformity with the applicable requirements of the following harmonized standards:
  • EN 60974-1:2005 Arc Welding Equipment - Part 1: Welding power sources.
  •EN60974-10:2007ArcWelding Equipment - Part 10: Electromagnetic compatibility (EMC)
requirements
Classification: The equipment described in this document is Class A and intended for industrial use.
!
WARNING
This Class A equipment is not intended for use in residential locations where the electrical power is provid-
ed by the public low-voltage supply system. There may be potential difficulties in ensuring electromagnetic
compatibility in those locations, due to conducted as well as radiated disturbances.