ESAB fabricator 141i Service Manual

ESAB FABRICATOR 141i
Manual 0-5448 7-5 DISASSEMBLY PROCEDURE
7.04 Front Panel Assembly Removal
!
CAUTION
Read and follow safety information in Section 6.02 before proceeding with disassembly.
1. Remove the five screws on front panel.
2 Unscrew Negative output terminal bolts.
3. Unscrew torch cable terminal bolts.
4. Unscrew output terminal bolts.
1
2
3
4
A-12930

ESAB fabricator 141i Specifications

General

Brand	ESAB
Model	fabricator 141i
Category	Welding System
Language	English