ESAB fabricator 141i Service Manual

ESAB FABRICATOR 141i
OPERATION 4-18 Manual 0-5448
4.15 Torch Adapter Thumb Screw Replacement
WARNING
All power to unit should be removed.
1. Place unit on its back.
A-12958
2. Remove 2 screws in bottom of the front panel. A securing block will become detached and fall free from the front panel
as you turn each screw out. Set these aside for reassembly. Leave screws sitting in the pockets of the panel.
Screws
Securing Block
Art # A-11483

ESAB fabricator 141i Specifications

General

Brand	ESAB
Model	fabricator 141i
Category	Welding System
Language	English