ESAB fabricator 141i Service Manual

ESAB FABRICATOR 141i
ASSEMBLY PROCEDURES 8-2 Manual 0-5448
8.02 Installing Rear panel
1. Install gas inlet.
2. Install ON/OFF switch
3. Install wire cord and 2 screws.
4. Reconnect Input Wire on the ON/OFF switch.
5. Install fan.
6. Install plastic inserts into rear panel feet and install panel screws.
1
1
3
2
6
4
5
A-12933
6
Art # A-12222

ESAB fabricator 141i Specifications

General

Brand	ESAB
Model	fabricator 141i
Category	Welding System
Language	English