Eureka Manta Manual Page 11 of 67
5 Type in the approximate conductivity of your tap water or the value of your conductivity standard and
click OK.
6 Click on OK in the next screen to finalize the calibration and be returned to the Home Page. (D.5)
7 Click the Manta pull-down menu on the Home Page then click Cal Log on the next screen. At the
bottom of the list are the details of the calibration that you just did.
8 Click on OK to return to the Home Page.
Was that easy, or what? Don’t you wish you had back all those frustrating, life-shortening, soul-crushing
hours you spent trying to decipher those other multiprobe manufacturers’ software?
To Next Page
Loading...
