Eureka MANTA+ - Learning the Manta in 30 Minutes

Eureka Manta Manual Page 6 of 67
A. LEARNING THE MANTA IN 30 MINUTES
A.1 See Your Manta
1. The Manta Multiprobe is configured with your choice of sensors, and with or without a battery
pack.
2. The Underwater Cable connects the Manta to a Data Display (PC, Amphibian, logger, telemetry
device or, using the Bluetooth Battery, a tablet or smart phone).
3. The Storage/Calibration Cup protects the sensors when the Manta is not in use (keep a few ounces
of tap water in the S/C Cup when the Manta is not being used). And with the lid removed, it holds
your calibration solutions.
4. The Manta Flash Drive contains the software for connecting your Manta to your PC or other Data
Display, plus a digital copy of this manual, several instructional videos, and several technical notes.
5. The optional Data Cable lets you communicate conveniently with your Manta when an
Underwater Cable is not needed, for instance, during Calibration.The USB Adapter connects
between your Underwater Cable (or Data Cable) and a USB port on your Display Device. The USB
2
3
7
4
6
1
5
8