Eureka Manta Manual Page 51 of 67
2 The Extended Turbidity Brush attaches to the turbidity sensor and cleans the measurement surfaces
of several sensors, including the Turner fluorometers (chlorophyll, blue-green algae, etc.) and the
Dissolved Oxygen sensor. Available on Manta 30, 35, and 40 models with turbidity sensors.
3 Eureka’s MiniCleaner is used for sensor brushing when the Manta does not have a turbidity sensor
(and hence cannot have the Extended Turbidity Brush). It can be programmed for frequency of brush
cycles and number of sweeps per cycle.
E.12 Pipe Kit
For extra protection for your Manta during deployments in areas with boat traffic, flooding, debris in the
waterway, etc., you can use a Pipe Kit. A Pipe Kit, which come in several diameters, is a PVC pipe with a
locking, sealed cap on the top end and water-passage slots at the bottom end. An eye-bolt in the cap lets
you tether the Pipe Kit if needed.
Because on a new Pipe Kit the cap is not glued to the slotted pipe, you can add more pipe (available at
home-improvement centers) before fixing the cap in place.
To Next Page
Loading...
