Evalue Technology ECM-3610 - System Wake-Up Events; Soft-Off, Wake Up Events, and Power On by PCI; Modem Ring Resume and RTC Alarm Disable

User’s Manual
68 ECM-3610/3610L User’s Manual
4.5.6.6 Soft-Off by PWRBTN
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off
state when the system has “hung”.(Only could working on ATX Power supply)
The choice: Delay 4 Sec, Instant-Off.
4.5.6.7 Wake up Events
PM Wake up events are I/O events whose occurrence can prevent the system from
entering a power saving mode or can awaken the system from such a mode. In effect, the
system remains alert for anything which occurs to a device which is configured as On,
even when the system is in a power down mode.
4.5.6.7.1 VGA
When ON, your can set the LAN awakens the system.
4.5.6.7.2 LPT & COM
When select LPT/COM, any activity from one of the listed system peripheral devices or
IRQs wakes up the system.
4.5.6.7.3 HDD & FDD
When On of HDD & FDD, any activity from one of the listed system peripheral devices
wakes up the system.
4.5.6.7.4 PCI Master
When you are On of PCI Master, any activity from one of the list system peripheral
devices wakes up the system.
4.5.6.8 Power On by PCI Card
This item allows you to determine that does any activity from one of the list system
peripheral devices wakes up the system.
The Choice. Enable, Disabled.
4.5.6.8.1 Modem Ring Resume
An input signal on the serial Ring Indicator (RI) line (in other words, an incoming call on
the modem) awakens the system from a soft off state.
4.5.6.8.2 DisableRTC Alarm Function
When Enabled, your can set the date and time at which the RTC (real-time clock) alarm
awakens the system from Suspend mode.