EverFocus ECOR2 - Browser Security Setting; Installing Activex Controls

115
 Enter a user name and password to access the recorder. These can be changed in the System
section of the Main Menu.
 The default user name is “admin”. The default password is “11111111”.
 Click on the Login button and you will log in to the recorder’s Network Viewer.
6.2 BROWSER SECURITY SETTING
6.2.1 Installing ActiveX controls
When you first connect to the DVR’s IP address, you should see a screen like the one below. If you do not
see a yellow bar like the one the arrow is pointing at, your security settings may be too high. If so, go to
“Section 6.2.2 - Enabling ActiveX Controls.”
Right click on the yellow bar and select “Install This Add-on…”