8
○
8
RS485 socket: For remote control via RS-485 keyboards and telemetry control for attached PTZ
devices
○
9
Main: Main monitor for live and playback display and on-screen display.
○
10
Call: Call monitor output. Spot monitor for full screen live display, sequence mode and alarm
camera switching.
○
11
Main VGA: Main monitor - connect a VGA monitor to the VGA output connection. VGA resolution is
800x600.
○
12
Alarm In: Connect up to 4 alarm inputs, selectable between N.O./N.C. contacts.
○
13
Video Out: Looping Outputs - connect the camera video signals to other equipment as required.
○
14
Alarm Out: N.C or N.O type alarm out (form “C”).
○
15
Audio Out: Connect to the line level input of an audio amplifier.
To Next Page
Loading...
