Model 5600MSC Master Clock/SPG Manual
Page 3-58
Revision 1.6 OPERATION
3.7.3.4. Setting the Modem Phone Number to Dial
GENERAL
MODEM SETUP
Phone number
000-000-000
This menu item sets the phone number of the time information provider to
call. This number may be the number of a high-level time standards service
such as the Canadian National Research Council (NRC) or another
5600MSC that is referenced to GPS time.
When you press the
SELECT key the current phone number will be
displayed. If you want to exit the phone number entry mode press the
ESC
key at any time.
Enter the phone number using the numeric keys. Remember to enter all the
digits required to get an outside line. You can insert a 1 second pause
(indicated by a “P” ) into the dialing string by pressing the up arrow (
Ï) key.
When you have entered the phone number press the
SELECT key.
At the time of printing the following phone numbers are valid for these time
standards services:
Canadian National Research Council +1 (613) 745-3900
3.7.3.5. Setting the Time that the Modem will Dial Out
GENERAL
MODEM SETUP
Dial time (UTC)
00:00:00 TIME
This menu item sets the time that the modem will dial out, when the
Modem
Mode
menu item is set to auto dial or auto dial/answer.
When you press the
SELECT key the current dial time will be displayed in
hh:mm:ss format with the hours digits blinking. If you want to exit the time
entry mode press the
ESC key at any time.
Enter the dial time as universal coordinated time (UTC) using the following
procedure.
1. Press any numeric key to enter a new value into the right digit of the
blinking digit pair or press the
SELECT key to advance to the next digit
pair. Press another numeric key to shift the first digit to the left and enter
a new value into the right digit of the blinking digit pair. The Minutes digit
pair will now be blinking
2. Repeat step 1 for the minutes and seconds.
3. When you are finished entering the seconds, the menu will return to
Dial time (UTC).
To Next Page
Loading...