evertz 5600MSC - Page 38

Model 5600MSC Master Clock/SPG Manual
Revision 1.6
3.6.1.8. Enabling Daylight Saving Time Compensation on the LTC Output ....................... 3-21
3.6.1.9. Enabling the LTC Output Parity Bit........................................................................ 3-21
3.6.1.10. Enabling LTC Output Colour Frame Bit ................................................................. 3-21
3.6.1.11. Setting The LTC Output Level ...............................................................................3-21
3.6.2. Configuring the Video Sync Outputs............................................................................... 3-21
3.6.2.1. Selecting the Clock frequency for Each Bank of the Sync Outputs ....................... 3-22
3.6.2.2. Selecting the Standard of the Sync Outputs.......................................................... 3-22
3.6.2.3. Configuring the VITC Generator for the Colour Black Outputs.............................. 3-23
3.6.2.3.1. Enabling VITC on the Video Output.............................................................. 3-23
3.6.2.3.2. Selecting the VITC Lines............................................................................... 3-24
3.6.2.3.3. Enabling Drop Frame Compensation on the VITC Output............................ 3-24
3.6.2.3.4. Enabling Colour Frame Compensation on the VITC Output......................... 3-25
3.6.2.3.5. Selecting when the VITC Time is Synchronized to the System Time ........... 3-25
3.6.2.3.6. Synchronizing The VITC Time to the System Clock Immediately................. 3-26
3.6.2.3.7. Synchronizing The LTC and VITC Times to the System Clock Immediately 3-26
3.6.2.3.8. Setting The VITC Offset................................................................................ 3-26
3.6.2.3.9. Setting The VITC Time Zone ........................................................................3-27
3.6.2.3.10. Enabling Daylight Saving Time Compensation on the VITC Output............ 3-27
3.6.2.3.11. Enabling Ten Field Pulse.............................................................................3-28
3.6.2.4. Setting The Phase of the Sync Outputs................................................................. 3-28
3.6.3. Configuring the Analog Video Test Generator Output (STG Option only)...................... 3-30
3.6.3.1. Selecting the Standard of the Analog Video Test Generator Output ..................... 3-30
3.6.3.2. Setting The Phase of the Analog Video Test Generator Output............................ 3-30
3.6.3.3. Configuring the Analog Video Test Generator On Screen Message Display ........3-31
3.6.3.3.1. Editing the On Screen Message Display....................................................... 3-31
3.6.3.3.2. Positioning the On Screen Message Display................................................ 3-31
3.6.3.3.3. Enabling the On Screen Message Display.................................................... 3-31
3.6.3.3.4. Setting the Font Size of the On Screen Message Display ............................ 3-32
3.6.3.4. Enabling the SDI Test Generator Moving Line ......................................................3-32
3.6.4. Selecting the Analog Video Test Generator Signal (STG Option only) ..........................3-32
3.6.5. Configuring the SDI Video Test Generator Output (STG Option only) ........................... 3-34
3.6.5.1. Selecting the Standard of the SDI Video Test Generator Output ..........................3-34
3.6.5.2. Setting The Phase of the SDI Video Test Generator Output ................................. 3-34
3.6.5.3. Configuring the SDI Video Test Generator On Screen Message Display.............. 3-34
3.6.5.3.1. Editing the On Screen Message Display....................................................... 3-35
3.6.5.3.2. Positioning the On Screen Message Display................................................ 3-35
3.6.5.3.3. Enabling the On Screen Message Display.................................................... 3-35
3.6.5.3.4. Setting the Font Size of the On Screen Message Display ............................ 3-35
3.6.5.4. Configuring the SDI Test Generator Embedded Audio.......................................... 3-35
3.6.5.4.1. Enabling the SDI Embedded Audio Channel in the Test Signal Output........ 3-36
3.6.5.4.2. Enabling the SDI Embedded Audio Channel in the Black Output................. 3-36
3.6.5.4.3. Setting the SDI Embedded Audio Channel Frequency................................. 3-37
3.6.5.4.4. Configuring the Embedded Audio Level........................................................ 3-37
3.6.5.4.5. Setting the SDI Embedded Audio Ident Mode ..............................................3-38
3.6.5.4.6. Setting the SDI Lip Sync Mode ..................................................................... 3-38
3.6.5.5. Enabling the SDI Test Generator Moving Line ......................................................3-38
3.6.6. Selecting the SDI Video Test Generator Signal (STG Option only)................................ 3-38
3.6.7. Configuring the HD SDI Video Test Generator Output (HTG Option only)..................... 3-39
3.6.7.1. Selecting the Standard of the HD SDI Video Test Generator Output .................... 3-39
3.6.7.2. Configuring The Genlock Reference for the HD SDI Test Generator.................... 3-39
3.6.7.2.1. Selecting if the HD SDI Test generator will Free Run or be Genlocked........ 3-39
USO RESTRITO