14 05 2013 4365 00
Every time the machine is connected to the power sup-
ply, the display will show the image
after that, the vending machine software version num-
ber is displayed together with the software review of the
machine board.
It is possible to programme the machine for displaying,
for a few seconds, the number of dispensed items (total
number of strokes)
Opera Rev. X.XX
Machine Board Rev. X.XX
Total number of strokes = XXXXXX
After that, the boiler is checked and the heating cycle is
started
MACHINE
HEATING PHASE
Espresso temperature
XX.X°C
At the end of the heating cycle, after a few seconds, the
display shows the message with the invitation to select
the drink and the lighting of the machine is activated.
SELECT A
BEVERAGE
Sugar
- ●●●○○ +
SERVICE SUSPENSION
If, for any reason, the vending machine remains o for a
period longer than the expiry dates of the products, it is
necessary to:
- Completely empty the containers and wash them care-
fully with the sterilising products used for the mixers.
- Completely empty the boiler and the air-break by loos-
ening the screw on the corresponding pipe.
To Next Page
Loading...
