15 05 2013 4365 00
Chapter 2
INSTALLATION
The installation and the subsequent maintenance
operations shall be carried out with the machine con-
nected to the power supply and therefore by specialised
personnel, trained for the use of the machine who has
been informed of the specic risks deriving from such a
situation.
The machine is not suitable for outside installations, it
needs to be installed inside dry premises, with tempera-
ture between 2° and 32°C.
The machine cannot be installed in environments in
which jets of water are used for cleaning.
-
cuits and the parts in contact with the food prod-
ucts need to be sterilised in order to eliminate any
bacteria which could have formed during storage.
DOOR SWITCH
When the door is opened, a microswitch removes the
voltage from the electrical system of the machine.
When the door is open, voltage is given to the machine
by inserting the appropriate key
protected by covers and which are highlighted with
a label “disconnect voltage before removing the
cover” remain live.
Before removing these covers it is necessary to dis-
connect the power supply cable from the mains.
The door can be closed only after removing the key from
the door switch.
.
1
8
4
5
6
7
3
2
Fig. 17
1- Door switch slot
2- Mains fuse
3- Panel fuses access door
4- LED inspection window
5- LED inspection window
6- LED inspection window
7- Serial connector
8- Programming input button
To Next Page
Loading...
