22 05 2013 4365 00
INSTANT DRINK DISPENSING
The dispensing cycles of the various selections are stud-
ied for obtaining the best result in terms of productivity
and quality of the drinks.
a number and the product name and described by
the water and product quantities and the dispens-
ing and mixing times.
These values are programmable via software with
appropriate functions.
Even the dispensing order of the individual ingredi-
ents within a recipe is programmable.
The powder for chocolate-based selections is dispensed
intermittently, whereas the powder for coee-based
selections is dispensed before the water.
Warning !!!
leaving any powder residue.
Preselections
Based on the layout that has been set on the machine,
it is possible to have dierent preselections; the prese-
lections foreseen for each layout are described in the
doses-selections table (layout selections) supplied with
the machine.
dosers Calibration
For the correct conversion of the amounts of the product
dose it is possible to set the value of the rate of each
of the dosers in g/sec for calculating the grams to be
dispensed.
boiler temperature adjustment
The temperature of the boiler is controlled by the soft-
ware; by default, the set temperature is 88° C.
The temperature can be adjusted directly from the menu.
variation of the setting for instant produCts
The grammage of the instant products, the dose of water
and the temperature are controlled directly by the micro-
processor.
The variation of these values is therefore performed
through the programming procedures.
To Next Page
Loading...
