EVOCA Opera - Individual Price; Management of Change Tubes

26 05 2013 4365 00
display
This function allows you to display in a sequence the
same statistics data that can be obtained with the print-
out.
Press the conrmation key

for displaying the data in a
sequence of the:
total Counters
1 - selections counter;
2 - bands counter;
3 - discounts counter:
4 - faults counter;
5 - coin box data.
relative Counters
1 - selections counter;
2 - bands counter;
3 - discounts counter:
4 - faults counter;
5 - coin box data
CanCellation
The relative counter statistics can be reset globally, for
all types of data, or selectively for:
- selections
- discounts
- faults
- coin box data
By pressing the conrmation key

the display will show
the ashing message: “Conrm?”
Press the conrmation key

for resetting the statistics,
during the operation the display shows the message
“Execution” and the statistics are reset.
INDIVIDUAL PRICE
The machine can manage up to 4 dierent prices per
selection, which can be active according to the time
band you have set (standard or promotional) and/or the
payment system in use.
Use this function to vary the sales price for every single
selection by selecting among the price ranges available.
MANAGEMENT OF CHANGE TUBES
This function is active only if the payment system
you have set up can perform this operation.
Access the function to load or empty the change tubes
manually.
If you conrm load, “Credit : ——” will appear on the
display. This is the value of the money made available
in the tubes for the change. If you insert a coin into the
validator, the display will increase the value of the money
made available in the tubes for the change.
If you conrm unload, you can establish the tube on
which you wish to act. Whenever you press the Enter key

, a coin is ejected by the active tube.