EWM PHOENIX 333 PROGRESS PULS forceArc - Page 15

Machine description
PHOENIX 333 PROGRESS KG
Item No.: 099-005073-EWM01 15
Item Symbol Description 0
1 Transport bar
2 Carrying handle
3
Main switch, machine on/off
4 Cooling air inlet
Connection socket, “-” welding current
• MIG/MAG welding: Workpiece connection
• MMA welding: Workpiece or electrode holder connection
5
• TIG welding: Welding current connection for welding torch
Connection socket, “+” welding current
• MMA welding: Workpiece or electrode holder connection
6
• TIG welding: Workpiece connection
7
7-pole connection socket (digital)
For connecting digital accessory components (remote control, welding torch control
lead, etc.)
8
19-pole connection socket (analogue)
For connecting analogue accessory components (remote control, welding torch control
lead, intermediate drive, etc.)
9 Rubber feet
10
Euro-central connector (welding torch connection)
Welding current, shielding gas and torch trigger included
11
0
1
Key switch for protection against unauthorised use
Position “1” > changes possible,
Position “0” > changes not possible.
Please take note of chapter “Key switch”
12
PC INT
PC interface, serial (D-SUB connection socket, 9-pole), optional
13 Control / Operating elements (see chapter Function specification)