EWM PHOENIX 333 PROGRESS PULS forceArc - Resetting Jobs (Welding Tasks) to the Factory Settings; Resetting a Single JOB; Resetting All Jobs

Functional characteristics
Resetting JOBs (welding tasks) to the factory settings
Item No.: 099-005073-EWM01 67
5.7 Resetting JOBs (welding tasks) to the factory settings
5.7.1 Resetting a single JOB
Operating
element
Action Result Display
3 sec.
Select JOB Reset
m/min
Set the JOB number to be reset
Confirm JOB reset.
(If not pressed within approx. 3 seconds, the machine switches to the
last parameters displayed and the JOB reset process is cancelled)
5.7.2 Resetting all JOBs
Operating
element
Action Result Display
3 sec.
Select JOB Reset
m/min
Set "All Reset" (after JOB 251)
Confirm JOB reset.
(If not pressed within approx. 3 seconds, the machine switches to the
last parameters displayed and the JOB reset process is cancelled)