26
EXCELL PRECISION CO., LTD.
ZSME200000051
2-8 Accumulation
The accumulation counts are up to 99 counts, but the total quantity column is at most 6
digits.
You can not do positive accumulation and negative accumulation at the same time.
2-8-1 Quantity Accumulation
1. Place an object on platter:
.
.
Stable
Weight of the object on platter Unit weight of the object Quantity of the object on platter
2. Press
M+
key
3. After scale is stable:
+
.
Stable
Accumulated total weight Accumulated total counts Accumulated total quantity
4. After about 3 seconds, scale returns to counting mode:
+
.
.
Stable
Weight of the object on platter Unit weight of the object Quantity of the object on platter
Quantity Accumulation Recall
While weight column displays 0, press
M+
key to recall the accumulated data:
→
→→
→0←
←←
←
+
.
Stable
Accumulated total weight Accumulated total counts Accumulated total quantity
Clear off the Accumulated Quantity Value
Press
MC
key to clear off the accumulated value in the memory, and accumulation
symbol “3” will disappear.
To Next Page
Loading...
