Excell H3 Series - Accumulation Acceptable Condition Setting 2

45
EXCELL PRECISION CO., LTD.
0300403
4
ZSME200000051
3-1-12 Accumulation Acceptable Condition Setting 2
 Default setting:
⇒ Only when the weight returns to zero, the scale accepts the next accumulation
data. If the weight is close to zero band, the scale can be adjusted by
⇒ It’s no need to return to zero and the scale can accept the next accumulation
data. That means when there is load, the weight can be accumulated
continuously.
⇒ The weight must return to zero (gross = 0), and the scale can accept the next
accumulation data.
⇒ Press M+ key not to accumulate the data, at the same time, RS232 would be
transmit the LCD data.


 key ⇒
⇒⇒
⇒ Exit
CE key ⇒
⇒⇒
⇒ Move the cursor leftward
TARE key ⇒
⇒⇒
⇒ Move the cursor rightward
MC key ⇒
⇒⇒
⇒ Enter
Press MC
Enter parameter 00 ~ 02
according to demand
Press MC to save the
setting data
Previous setting