Excell H3 Series - Accumulation Ending Mode Setting

41
EXCELL PRECISION CO., LTD.
0300403
4
ZSME200000051
3-1-8 Accumulation Ending Mode Setting
 Default setting:
⇒ Press M+ . After screen displays accumulation data for 3 seconds, the scale
will be back to weighing mode directly.
⇒ Press M+ . And the screen displays accumulation data. The scale will not be
back to weighing mode until pressing CE .
⇒ Press M+ . And the screen does not display accumulation data, but beeper
will “beep” once.


 key ⇒
⇒⇒
⇒ Exit
CE key ⇒
⇒⇒
⇒ Move the cursor leftward
TARE key ⇒
⇒⇒
⇒ Move the cursor rightward
MC key ⇒
⇒⇒
⇒ Enter
Press MC
Enter parameter 00 ~ 02
according to demand.
Press MC key to save
setting data
Previous setting