Excell H3 Series - Operation Mode Setting

58
EXCELL PRECISION CO., LTD.
0300403
4
ZSME200000051
3-3-5 Operation Mode Setting
 Default setting:
⇒ Command mode
⇒ Continuous transmission + command mode
⇒ Automatic transmission + command mode
⇒ Manual transmission + command mode
Please press M+ key or MC key to do manual transmission.
⇒ No RS-232 transmission
⇒ ZEBRA PRINTER special format
 If parameter of is set as (Reserved), the setting of
will be fixed as manual transmission but without command mode.
 For the illustration of command mode format, refer to “Appendix 1”.
 If there is free form device which is detected, it will be ” ” => Manual transmission＋
command mode.


 key ⇒
⇒⇒
⇒ Exit
CE key ⇒
⇒⇒
⇒ Move the cursor leftward
TARE key ⇒
⇒⇒
⇒ Move the cursor rightward
MC key ⇒
⇒⇒
⇒ Enter
Press MC
Enter parameter 00 ~ 04
according to demand
Press MC key to save
the setting data
Previous setting