28
EXCELL PRECISION CO., LTD.
ZSME200000051
2-9 Quantity Preset
It’s available to pre-set the upper limit of quantity under counting mode. If the counts are
over the limit, the beeper makes warning sounds, and the weight column displays
flashing
.
2-9-1 Upper Limit of Preset Quantity
1. Whether there is an object on platter or not, press
QTY PRESET
key.
→
→→
→0←
←←
←
.
Stable
.
2. Press
SAMPLE
key, choose “Quantity Preset” mode (press
UNIT WEIGHT
key to
choose “Weight Preset” mode)
→
→→
→0←
←←
←
Stable
Previous Preset
3. Enter the upper limit intended: (press
CE
key to modify the value entered)
→
→→
→0←
←←
←
Stable
Upper limit entered
4. Press
SAMPLE
key: (press
CE
key to modify the value entered)
→
→→
→0←
←←
←
Stable
5. Press
QTY PRESET
key, and the scale will be back to the counting mode:
→
→→
→0←
←←
←
.
Stable
2-9-2 Clear Upper Limit of Preset Quantity
To clear the pre-set upper limit of quantity or weight, please follow the above-mentioned
operation steps. When entering the pre-set value, please input “0” instead.
When switching to "Weight Preset "mode or "Quantity Preset" mode, previous Preset value will
be deleted automatically.
To Next Page
Loading...
Need help?
General
