Excell H3 Series - Accumulation Acceptable Condition Setting 1

44
EXCELL PRECISION CO., LTD.
0300403
4
ZSME200000051
3-1-11 Accumulation Acceptable Condition Setting 1
 Default setting:
⇒ The scale will accept accumulation only when being stable.
⇒ The scale will accept accumulation no matter its being stable or not.


 key ⇒
⇒⇒
⇒ Exit
CE key ⇒
⇒⇒
⇒ Move the cursor leftward
TARE key ⇒
⇒⇒
⇒ Move the cursor rightward
MC key ⇒
⇒⇒
⇒ Enter
Press MC
Enter parameter 00, 01
according to demand.
Press MC to save the
setting data.
Previous setting