Excell H3 Series - Page 59

57
EXCELL PRECISION CO., LTD.
0300403
4
ZSME200000051
3-3-4 Output Counts Setting Per second in Continuous
Transmission
 Default setting: (1 count/second)
⇒ 1 count/second
⇒ 2 counts/second
⇒ 4 counts/second
⇒ 8 counts/second
⇒ More than 8 counts/second
 If parameter of is set as (fixed format 1) or (fixed format 2),
it may not be available to reach the transmission counts due to too long distance.
 If parameter of is set as (Reserved), it’s not capable of
continuous transmission mode.
 If parameter of is set as ~ , it’s capable of continuous
transmission normally.


 key ⇒
⇒⇒
⇒ Exit
CE key ⇒
⇒⇒
⇒ Move the cursor leftward
TARE key ⇒
⇒⇒
⇒ Move the cursor rightward
MC key ⇒
⇒⇒
⇒ Enter
Press MC
Enter parameter 00 ~ 04
according to demand
Press MC key to save
setting data.
Previous setting