Inspecting Fiber Ends
94 FIP-400B
Transferring Results With Third-Party Applications
To transfer the current result:
1. Ensure that the Wi-Fi is activated on your smart device.
2. Ensure that you are connected to a Wi-Fi network.
3. In live video mode, tap .
OR
If you are using an MF-Ready probe and you are inspecting a multifiber
connector, perform the three captures. See Inspecting Multiple Fiber
Ends (MF-Ready Probes Only) on page 64 for details.
4. In the Results tab, tap .
Note:
To transfer a file, the Auto save feature in the Application Settings must be
set to Always.
To Next Page
Loading...
