Inspecting Fiber Ends
Fiber Inspection Probe 95
Transferring Results With Third-Party Applications
5.
Select the type of file (.cmax2 or .png) you want to share.
6.
Select the third-party application you want to work with.
7. Follow the instructions on-screen.
To transfer one or more results from the Archive mode:
1. Ensure that the Wi-Fi is activated on your smart device.
2. Ensure that you are connected to a Wi-Fi network.
3. Tap the Results tab.
4. Tap .
5. In the Archive window, tap Measurements or Reports.
6. Select the measurement files you want to share by pressing and
holding your finger on the screen.
To Next Page
Loading...
