EXFO FIP-435B - Inspecting Fiber Ends; Inspecting Fiber Ends (Single Fiber and Transceiver - Fiber Receptacles)

Setting up Your Fiber Inspection Probe and ConnectorMax2 Mobile
Fiber Inspection Probe 49
Managing and Selecting Test Configurations
To hide test configurations:
1. From the main window, tap at the end of the Test Configuration
row.
2. To enter the edition mode, press and hold any test configuration in the
Test Configuration window.
3. Tap the test configuration you want to hide.
4. Tap to hide the test configuration.
5. Tap to exit the edition mode.
6. Tap to return to the main window.
Indicates you are working in edition mode.