Getting Started with Your Unit
20 FIP-500
Configuring Your Unit at First Startup
4. Read the safety instructions and confirm as follows:
4a. Use the QR code to download the user documentation to your
smart device.
4b. Select the I have read the safety instructions box, then tap Next.
5. Tap Close when you have finished.
6. EXFO recommends to configure a Wi-Fi network that will allow you to
retrieve the software updates. You can proceed as follows:
6a. Install the EXFO Exchange application on your smart device
(see Installing the EXFO Exchange Application on Your Smart
Device on page 53).
6b. Establish a Bluetooth connection between the FIP-500 and the
smart device (see Establishing or Closing a Connection With a
Smart Device Via the Bluetooth Technology on page 54).
6c. Configure a wireless network (see Working With a Wireless
Network on page 62).
You are now ready to start working with your FIP-500.
To Next Page
Loading...
