Inspecting Fiber Ends
48 FIP-500
Navigating Through Multi-Fiber Captures
Navigating Through Multi-Fiber Captures
When you inspect multi-fiber connectors, once the analysis is complete,
the application displays an overview of the connector (where several fibers
are visible at a time). It allows you to have a global view of the inspection
results as well as a way to localize large debris that could be located
outside the perimeter of the fibers themselves.
From this overview, you can access the detailed capture of any of the
inspected fibers that are part of the connector, and vice versa.
From a specific fiber view, you can navigate to the previous or next fiber on
the same row. You can also navigate from one row to another when you
work with connectors having a multi-row fiber layout.
To scroll through the inspection results:
Swipe left or right on the screen.
To switch from one fiber row to the other (multi-row fiber
layouts):
Swipe up or down on the screen.
To Next Page
Loading...
