Fiber Inspection Scope 53
6 Working with the EXFO
Exchange Application
You can use your FIP-500 in association with a smart device equipped with
the EXFO Exchange application allowing you to retrieve the software
updates and send captures to EXFO for technical support.
Note: Depending on the type of smart device you are using, the appearance of the
EXFO Exchange application may vary slightly from the illustrations
presented in this documentation. Unless otherwise specified, the
information applies both to the Android- and iOS-based smart devices.
Installing the EXFO Exchange Application on
Your Smart Device
Before you start working, if you intend to retrieve the software updates for
your unit, you will need to install the EXFO Exchange application on your
smart device.
To install the EXFO Exchange application:
1. Ensure that you have access to an Internet connection.
2. From your Android-based smart device, open the Google Play Store
(usually Play Store or Play icon).
OR
From your iOS-based smart device, open the App Store (usually App
Store icon).
3. From the Play Store or the App Store, search for EXFO or EXFO
Exchange to localize the EXFO Exchange application.
4. Start the installation and follow the on-screen instructions.
To Next Page
Loading...
